Furuno MG5436 Magnetron (000-140-762-13)

Specifications

OEMFuruno
Part typePulse-radar magnetron (microwave tube)
Magnetron designationMG5436
Frequency bandX-band (approx. 9410 MHz)
Peak output power25 kW
Furuno part number000-140-762-13
Radar fitmentFAR-1528 / FAR-2127 / FAR-3220

Technical notes

The MG5436 is the 25 kW X-band magnetron fitted to Furuno FAR-1528, FAR-2127 and FAR-3220 series marine radars, supplied under Furuno part number 000-140-762-13. The magnetron is the vacuum microwave tube that generates the radar's transmit pulse; its emission life is finite and measured in operating hours, so peak power falls gradually and the radar loses maximum range and small-target detection as the tube ages. It is therefore replaced on condition as a planned consumable rather than run to failure. Fitment is exact — the MG5436 is matched to its radar series by X-band frequency, 25 kW peak power and mechanical mount — so confirm the Furuno part number against the installed radar model before ordering, and have the set retuned by a qualified technician after fitting.

Compliance

Bridge radar is type-approved under SOLAS Chapter V; fit the approved magnetron for the radar model to preserve type-approval status. Supplied new with manufacturer warranty.

Compatibility

Related

RFQ answered within ~4 h at major hubs routed to vetted suppliers no public pricing

Frequently asked questions

Which radars does the MG5436 fit?
The MG5436 (Furuno 000-140-762-13) is a 25 kW X-band magnetron for the FAR-1528, FAR-2127 and FAR-3220 series. Confirm the part number against your radar model before ordering.
Is the MG5436 the same as Furuno 000-140-762-13?
Yes. 000-140-762-13 is the Furuno part number for the MG5436 25 kW X-band magnetron.
Why does a radar magnetron need replacing?
Its emission life is finite; peak output falls with operating hours, so the radar loses range and small-target sensitivity. It is replaced on condition rather than run to failure.
Request quote